Water Proof Wall Putty
Before the colour,
lay the foundation.
White cement-based powder putty with waterproofing additives for interior and exterior plastered surfaces, giving a smooth white finish.
Plan your project
A LITTLE INSPIRATION FOR YOUR SPACE
Illustrative setting · not a product application photograph- Smooth matt finish
- Good filling and levelling
- Waterproofing additives
Help the next coat
start in the right place.
White cement-based powder putty with waterproofing additives for interior and exterior plastered surfaces, giving a smooth white finish.
Match the surface
Choose a primer intended for the substrate and topcoat.
Prepare & prime
Follow the product’s preparation and thinning instructions.
Build the finish
Allow the specified drying time before the compatible topcoat.
Your next step,
made simple.
Choose a pack and ask us about Water Proof Wall Putty for your project.
Know the details.
Get the finish right.
Practical guidance for your painter and your project.
Technical data sheetProduct application & specificationsDownloadProduct specifications & pack sizes
| Product family | Wall Putty |
|---|---|
| Pack sizes | 20kg, 40kg |
| Finish | Smooth matt; white |
| Coverage | 1–1.4 m²/kg for two coats on rough masonry; apply by putty knife |
| Surface drying | 30 minutes |
| Recoating | 6–8 hours at 30°C and 65% RH |
| Mixing | 350–450 ml water per kg of putty |
Source: Waterproof Putty FINAL.pdf
Preparation & application
- Allow new plaster to cure completely. Clean away dust, grease, loose material and chalking; sand where required and repair leakage or seepage before painting.
- Follow the specified primer–putty–primer system. After putty application, allow 6–8 hours, sand with 180-grade paper and clean; follow with the appropriate primer and emulsion system.
- Pre-wet before the first and second putty coats. Mix homogeneously and allow 5–10 minutes before use. Do not use putty to fill cracks or sand vigorously.
Coverage & important notes
Coverage varies with application method, surface roughness, porosity and site conditions. Figures retain the coat/system basis stated in the supplied TDS.
Read the full technical data sheet for substrate-specific preparation, compatible coating systems, precautions and safety information. Warranty claims are subject to separate warranty terms.
Before you choose.
What is Water Proof Wall Putty used for?
White cement-based powder putty with waterproofing additives for interior and exterior plastered surfaces, giving a smooth white finish.
Which pack sizes are available for Water Proof Wall Putty?
Water Proof Wall Putty is listed in 20kg, 40kg packs in the supplied technical data sheet.
What coverage does Water Proof Wall Putty provide?
Coverage: 1–1.4 m²/kg for two coats on rough masonry; apply by putty knife. Coverage varies with application method, surface roughness, porosity and site conditions. Figures retain the coat/system basis stated in the supplied TDS.
When can Water Proof Wall Putty be recoated?
6–8 hours at 30°C and 65% RH. Follow the substrate-specific application sequence in the technical data sheet.
