Acrylic Wall Putty
Before the colour,
lay the foundation.
Water-based acrylic paste putty for filling dents and levelling primed walls before emulsion topcoats.
Plan your project
A LITTLE INSPIRATION FOR YOUR SPACE
Illustrative setting · not a product application photograph- Smooth matt finish
- Good filling and levelling
Help the next coat
start in the right place.
Water-based acrylic paste putty for filling dents and levelling primed walls before emulsion topcoats.
Match the surface
Choose a primer intended for the substrate and topcoat.
Prepare & prime
Follow the product’s preparation and thinning instructions.
Build the finish
Allow the specified drying time before the compatible topcoat.
Your next step,
made simple.
Choose a pack and ask us about Acrylic Wall Putty for your project.
Know the details.
Get the finish right.
Practical guidance for your painter and your project.
Technical data sheetProduct application & specificationsDownloadProduct specifications & pack sizes
| Product family | Wall Putty |
|---|---|
| Pack sizes | 1kg, 5kg, 10kg, 20kg |
| Finish | Smooth matt; white |
| Coverage | 3–4 m²/kg for one coat on normal masonry; apply by putty knife |
| Surface drying | 30 minutes |
| Recoating | 6–8 hours at 30°C and 65% RH |
Source: Acrylic Wall Putty _Final.pdf
Preparation & application
- Allow new plaster to cure completely. Clean away dust, grease, loose material and chalking; sand where required and repair leakage or seepage before painting.
- Follow the specified primer–putty–primer system. After putty application, allow 6–8 hours, sand with 180-grade paper and clean; follow with the appropriate primer and emulsion system.
Coverage & important notes
Coverage varies with application method, surface roughness, porosity and site conditions. Figures retain the coat/system basis stated in the supplied TDS.
Read the full technical data sheet for substrate-specific preparation, compatible coating systems, precautions and safety information. Warranty claims are subject to separate warranty terms.
Before you choose.
What is Acrylic Wall Putty used for?
Water-based acrylic paste putty for filling dents and levelling primed walls before emulsion topcoats.
Which pack sizes are available for Acrylic Wall Putty?
Acrylic Wall Putty is listed in 1kg, 5kg, 10kg, 20kg packs in the supplied technical data sheet.
What coverage does Acrylic Wall Putty provide?
Coverage: 3–4 m²/kg for one coat on normal masonry; apply by putty knife. Coverage varies with application method, surface roughness, porosity and site conditions. Figures retain the coat/system basis stated in the supplied TDS.
When can Acrylic Wall Putty be recoated?
6–8 hours at 30°C and 65% RH. Follow the substrate-specific application sequence in the technical data sheet.
