Styla Smart Sheen Interior Emulsion
A little colour.
A room that feels yours.
Interior emulsion with good whiteness, a smooth finish, high opacity and coverage.
Plan your project
A LITTLE INSPIRATION FOR YOUR SPACE
Illustrative setting · not a product application photograph- Soft sheen finish
- Smooth finish
Find your colour.
Choose a shade. See your space in a new light.
Illustrative preview. Confirm shade availability and check a physical sample.
Your next step,
made simple.
Choose a pack and ask us about Styla Smart Sheen Interior Emulsion for your project.
Know the details.
Get the finish right.
Practical guidance for your painter and your project.
Technical data sheetProduct application & specificationsDownloadProduct specifications & pack sizes
| Product family | Interior Emulsions |
|---|---|
| Pack sizes | 1L, 4L, 10L, 20L |
| Finish | Soft sheen |
| Coverage | 18–20 m²/L per coat on normal masonry, by brush, roller or spray |
| Application coats | 2–3 coats; dark shades may need additional coats |
| Dilution | 500–650 ml clean water per litre of paint |
| Surface drying | 30 minutes |
| Recoating | 4 hours at 30°C and 65% RH |
| Thinned paint | Use within 24 hours |
Source: Astral Styla Smart Sheen Emulsion 2025.pdf
Preparation & application
- Allow new plaster to cure completely. Clean away dust, grease, loose material and chalking; sand where required and repair leakage or seepage before painting.
- Apply suitable Astral primer and allow 4–6 hours to dry. Level with the specified putty, allow 6–8 hours, sand with 180-grade paper and clean. Apply a second primer coat, then sand with 320-grade paper and clean.
- Dilute as specified and apply 2–3 finishing coats. The application section gives 3–4 hours between coats; the technical table specifies a 4-hour recoat interval. Dark shades may need extra coats for hiding.
Coverage & important notes
Coverage varies with application method, surface roughness, porosity and site conditions. Figures retain the coat/system basis stated in the supplied TDS.
Read the full technical data sheet for substrate-specific preparation, compatible coating systems, precautions and safety information. Warranty claims are subject to separate warranty terms.
Before you choose.
What is Styla Smart Sheen Interior Emulsion used for?
Interior emulsion with good whiteness, a smooth finish, high opacity and coverage.
Which pack sizes are available for Styla Smart Sheen Interior Emulsion?
Styla Smart Sheen Interior Emulsion is listed in 1L, 4L, 10L, 20L packs in the supplied technical data sheet.
What coverage does Styla Smart Sheen Interior Emulsion provide?
Coverage: 18–20 m²/L per coat on normal masonry, by brush, roller or spray. Coverage varies with application method, surface roughness, porosity and site conditions. Figures retain the coat/system basis stated in the supplied TDS.
When can Styla Smart Sheen Interior Emulsion be recoated?
4 hours at 30°C and 65% RH. Follow the substrate-specific application sequence in the technical data sheet.
