Styla Popular Interior Emulsion
A little colour.
A room that feels yours.
Interior emulsion combining a smooth, durable finish with an economical decorative coating.
Plan your project
A LITTLE INSPIRATION FOR YOUR SPACE
Illustrative setting · not a product application photograph- Matt finish
- Smooth finish
Find your colour.
Choose a shade. See your space in a new light.
Illustrative preview. Confirm shade availability and check a physical sample.
Your next step,
made simple.
Choose a pack and ask us about Styla Popular Interior Emulsion for your project.
Know the details.
Get the finish right.
Practical guidance for your painter and your project.
Technical data sheetProduct application & specificationsDownloadProduct specifications & pack sizes
| Product family | Interior Emulsions |
|---|---|
| Pack sizes | 1L, 4L, 10L, 20L |
| Finish | Matt |
| Coverage | 19–22 m²/L per coat on normal masonry, by brush, roller or spray |
| Application coats | 2–3 coats; dark shades may need additional coats |
| Dilution | 500–700 ml clean water per litre of paint |
| Surface drying | 30 minutes |
| Recoating | 4 hours at 30°C and 65% RH |
| Thinned paint | Use within 24 hours |
Source: Styla Popular Interior Emulsion_TDS Astral _2025.pdf
Preparation & application
- Allow new plaster to cure completely. Clean away dust, grease, loose material and chalking; sand where required and repair leakage or seepage before painting.
- Apply suitable Astral primer and allow 4–6 hours to dry. Level with the specified putty, allow 6–8 hours, sand with 180-grade paper and clean. Apply a second primer coat, then sand with 320-grade paper and clean.
- Dilute as specified and apply 2–3 finishing coats. The application section gives 3–4 hours between coats; the technical table specifies a 4-hour recoat interval. Dark shades may need extra coats for hiding.
Coverage & important notes
Coverage varies with application method, surface roughness, porosity and site conditions. Figures retain the coat/system basis stated in the supplied TDS.
Read the full technical data sheet for substrate-specific preparation, compatible coating systems, precautions and safety information. Warranty claims are subject to separate warranty terms.
Before you choose.
What is Styla Popular Interior Emulsion used for?
Interior emulsion combining a smooth, durable finish with an economical decorative coating.
Which pack sizes are available for Styla Popular Interior Emulsion?
Styla Popular Interior Emulsion is listed in 1L, 4L, 10L, 20L packs in the supplied technical data sheet.
What coverage does Styla Popular Interior Emulsion provide?
Coverage: 19–22 m²/L per coat on normal masonry, by brush, roller or spray. Coverage varies with application method, surface roughness, porosity and site conditions. Figures retain the coat/system basis stated in the supplied TDS.
When can Styla Popular Interior Emulsion be recoated?
4 hours at 30°C and 65% RH. Follow the substrate-specific application sequence in the technical data sheet.
