Styla Hi-Sheen Interior Emulsion
A little colour.
A room that feels yours.
Interior emulsion with a smooth finish, added gloss, good coverage and ease of application.
Plan your project
A LITTLE INSPIRATION FOR YOUR SPACE
Illustrative setting · not a product application photograph- High sheen finish
- Smooth finish
Find your colour.
Choose a shade. See your space in a new light.
Illustrative preview. Confirm shade availability and check a physical sample.
Your next step,
made simple.
Choose a pack and ask us about Styla Hi-Sheen Interior Emulsion for your project.
Know the details.
Get the finish right.
Practical guidance for your painter and your project.
Technical data sheetProduct application & specificationsDownloadProduct specifications & pack sizes
| Product family | Interior Emulsions |
|---|---|
| Pack sizes | 1L, 4L, 10L, 20L |
| Finish | High sheen |
| Coverage | 19–22 m²/L per coat on normal masonry, by brush, roller or spray |
| Application coats | 2–3 coats; dark shades may need additional coats |
| Dilution | 400–450 ml clean water per litre of paint |
| Surface drying | 30 minutes |
| Recoating | 4 hours at 30°C and 65% RH |
| Thinned paint | Use within 24 hours |
Source: Styla Hi-Sheen Interior Emulsion_TDS Astral _2025.pdf
Preparation & application
- Allow new plaster to cure completely. Clean away dust, grease, loose material and chalking; sand where required and repair leakage or seepage before painting.
- Apply suitable Astral primer and allow 4–6 hours to dry. Level with the specified putty, allow 6–8 hours, sand with 180-grade paper and clean. Apply a second primer coat, then sand with 320-grade paper and clean.
- Dilute as specified and apply 2–3 finishing coats. The application section gives 3–4 hours between coats; the technical table specifies a 4-hour recoat interval. Dark shades may need extra coats for hiding.
Coverage & important notes
Coverage varies with application method, surface roughness, porosity and site conditions. Figures retain the coat/system basis stated in the supplied TDS.
Read the full technical data sheet for substrate-specific preparation, compatible coating systems, precautions and safety information. Warranty claims are subject to separate warranty terms.
Before you choose.
What is Styla Hi-Sheen Interior Emulsion used for?
Interior emulsion with a smooth finish, added gloss, good coverage and ease of application.
Which pack sizes are available for Styla Hi-Sheen Interior Emulsion?
Styla Hi-Sheen Interior Emulsion is listed in 1L, 4L, 10L, 20L packs in the supplied technical data sheet.
What coverage does Styla Hi-Sheen Interior Emulsion provide?
Coverage: 19–22 m²/L per coat on normal masonry, by brush, roller or spray. Coverage varies with application method, surface roughness, porosity and site conditions. Figures retain the coat/system basis stated in the supplied TDS.
When can Styla Hi-Sheen Interior Emulsion be recoated?
4 hours at 30°C and 65% RH. Follow the substrate-specific application sequence in the technical data sheet.
