Premium Synthetic Enamel
Let the details
make the difference.
Alkyd-based glossy topcoat for suitably primed metal, wood and concrete surfaces, formulated for opacity and durability.
Plan your project
A LITTLE INSPIRATION FOR YOUR SPACE
Illustrative setting · not a product application photograph- Glossy finish
- Stain resistant
- Excellent hardness
Bring a little attention
to every detail.
From suitably primed wood to metal and concrete, choose the coating system that suits the surface. The finish is only as good as the preparation beneath it.
Choose the surface
Check the TDS for compatible substrates and primers.
Prepare properly
Clean, prime and fill where required before the finishing coat.
Give it time
Respect the recommended dilution and drying intervals.
Your next step,
made simple.
Choose a pack and ask us about Premium Synthetic Enamel for your project.
Know the details.
Get the finish right.
Practical guidance for your painter and your project.
Technical data sheetProduct application & specificationsDownloadProduct specifications & pack sizes
| Product family | Enamel |
|---|---|
| Pack sizes | 200ml, 500ml, 1L, 4L, 10L, 20L |
| Finish | Smooth glossy |
| Coverage | 17–20 m²/L per coat on smooth flat wall / mild steel by brush |
| Dilution | 80–100 ml pure mineral turpentine per litre |
| Application coats | 2 coats in application instructions; recommended system lists 2–3 coats |
| Surface drying | 3 hours |
| Recoating | 8 hours at 30°C and 65% RH |
Source: Premium Synthetic Enamel_TDS_V2.pdf
Preparation & application
- Prepare and prime the specific substrate using the compatible primer in the TDS. Level with suitable filler where required; sand and clean between coats.
- Apply the diluted enamel with at least 8 hours between successive coats. Follow the separate masonry and mild-steel systems in the TDS.
Coverage & important notes
Coverage varies with application method, surface roughness, porosity and site conditions. Figures retain the coat/system basis stated in the supplied TDS.
Read the full technical data sheet for substrate-specific preparation, compatible coating systems, precautions and safety information. Warranty claims are subject to separate warranty terms.
Before you choose.
What is Premium Synthetic Enamel used for?
Alkyd-based glossy topcoat for suitably primed metal, wood and concrete surfaces, formulated for opacity and durability.
Which pack sizes are available for Premium Synthetic Enamel?
Premium Synthetic Enamel is listed in 200ml, 500ml, 1L, 4L, 10L, 20L packs in the supplied technical data sheet.
What coverage does Premium Synthetic Enamel provide?
Coverage: 17–20 m²/L per coat on smooth flat wall / mild steel by brush. Coverage varies with application method, surface roughness, porosity and site conditions. Figures retain the coat/system basis stated in the supplied TDS.
When can Premium Synthetic Enamel be recoated?
8 hours at 30°C and 65% RH. Follow the substrate-specific application sequence in the technical data sheet.