Styla Premium Acrylic Distemper
A little colour.
A room that feels yours.
Premium acrylic distemper for interior masonry surfaces with a smooth decorative finish.
Plan your project
A LITTLE INSPIRATION FOR YOUR SPACE
Illustrative setting · not a product application photograph- Smooth finish
- Interior decoration
Find your colour.
Choose a shade. See your space in a new light.
Illustrative preview. Confirm shade availability and check a physical sample.
Your next step,
made simple.
Choose a pack and ask us about Styla Premium Acrylic Distemper for your project.
Know the details.
Get the finish right.
Practical guidance for your painter and your project.
Technical data sheetProduct application & specificationsDownloadProduct specifications & pack sizes
| Product family | Distemper |
|---|---|
| Pack sizes | 1kg, 2kg, 5kg, 10kg, 20kg |
| Coverage | 17–20 m²/kg per coat |
| Dilution | 700–750 ml water per kg |
| Application coats | 2–3 coats; dark shades may require additional coats |
| Surface drying | 30 minutes |
| Recoating | 4 hours at 30°C and 65% RH |
| Thinned paint | Use within 24 hours |
| Finish | Smooth matt |
Source: Styla Premium Acrylic Distemper_TDS Astral .pdf
Preparation & application
- Allow new plaster to cure completely. Clean away dust, grease, loose material and chalking; sand where required and repair leakage or seepage before painting.
- Use the primer–putty–primer preparation system in the TDS. Apply 2–3 diluted finishing coats; the application section specifies 3–4 hours between coats, while the technical table specifies 4 hours.
Coverage & important notes
Coverage varies with application method, surface roughness, porosity and site conditions. Figures retain the coat/system basis stated in the supplied TDS.
Read the full technical data sheet for substrate-specific preparation, compatible coating systems, precautions and safety information. Warranty claims are subject to separate warranty terms.
Before you choose.
What is Styla Premium Acrylic Distemper used for?
Premium acrylic distemper for interior masonry surfaces with a smooth decorative finish.
Which pack sizes are available for Styla Premium Acrylic Distemper?
Styla Premium Acrylic Distemper is listed in 1kg, 2kg, 5kg, 10kg, 20kg packs in the supplied technical data sheet.
What coverage does Styla Premium Acrylic Distemper provide?
Coverage: 17–20 m²/kg per coat. Coverage varies with application method, surface roughness, porosity and site conditions. Figures retain the coat/system basis stated in the supplied TDS.
When can Styla Premium Acrylic Distemper be recoated?
4 hours at 30°C and 65% RH. Follow the substrate-specific application sequence in the technical data sheet.