Premium Interior Primer
Before the colour,
lay the foundation.
Solvent-thinnable synthetic-resin interior primer for concrete surfaces and subsequent enamel-based topcoats.
Plan your project
A LITTLE INSPIRATION FOR YOUR SPACE
Illustrative setting · not a product application photograph- Matt finish
- Surface adhesion
Help the next coat
start in the right place.
Solvent-thinnable synthetic-resin interior primer for concrete surfaces and subsequent enamel-based topcoats.
Match the surface
Choose a primer intended for the substrate and topcoat.
Prepare & prime
Follow the product’s preparation and thinning instructions.
Build the finish
Allow the specified drying time before the compatible topcoat.
Your next step,
made simple.
Choose a pack and ask us about Premium Interior Primer for your project.
Know the details.
Get the finish right.
Practical guidance for your painter and your project.
Technical data sheetProduct application & specificationsDownloadProduct specifications & pack sizes
| Product family | Solvent Thinnable Primers |
|---|---|
| Pack sizes | 1L, 4L, 10L, 20L |
| Finish | Smooth matt |
| Coverage | 12–15 m²/L per coat on normal masonry by brush, roller or spray |
| Dilution | 7–10% pure mineral turpentine |
| Surface drying | 1 hour maximum |
| Recoating | 4–6 hours at 30°C and 65% RH |
Source: Premium Interior Primer ST_TDS Astral .pdf
Preparation & application
- Allow new plaster to cure completely. Clean away dust, grease, loose material and chalking; sand where required and repair leakage or seepage before painting.
- Thin as specified and apply the primer. Use the substrate-specific filler and topcoat sequence in the linked TDS.
- The application instructions allow 6–8 hours after priming. Apply the finishing coat within 7–8 days; check the TDS technical table for the stated recoat time.
Coverage & important notes
Coverage varies with application method, surface roughness, porosity and site conditions. Figures retain the coat/system basis stated in the supplied TDS.
Read the full technical data sheet for substrate-specific preparation, compatible coating systems, precautions and safety information. Warranty claims are subject to separate warranty terms.
Before you choose.
What is Premium Interior Primer used for?
Solvent-thinnable synthetic-resin interior primer for concrete surfaces and subsequent enamel-based topcoats.
Which pack sizes are available for Premium Interior Primer?
Premium Interior Primer is listed in 1L, 4L, 10L, 20L packs in the supplied technical data sheet.
What coverage does Premium Interior Primer provide?
Coverage: 12–15 m²/L per coat on normal masonry by brush, roller or spray. Coverage varies with application method, surface roughness, porosity and site conditions. Figures retain the coat/system basis stated in the supplied TDS.
When can Premium Interior Primer be recoated?
4–6 hours at 30°C and 65% RH. Follow the substrate-specific application sequence in the technical data sheet.
